Extreme Angle Master Flash®

Extreme Angle Master Flash® Features:

The Extreme Angle Master Flash® Pipe Boot Flashing is specifically designed for application to a metal roof with a 35° to 65° angle while still coping with commonly encountered pipe penetrations.

• 3 sizes (#1, #2, #3)

• Fits: Closed Top to 12” (0 to 304mm) Pipes

• Base: #1 11” (279mm) • #2 14-1/4” (362mm) • #3 16-3/4” (425mm)

• Made of Black EPDM Rubber or High Temp Gray Silicone, the flashings are specially compounded for a maximum resistance to ultraviolet light and ozone corrosion.

• The built in 40º degree pitch Allows to handle any extreme roof pitch (35º – 65º), sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction.

• A simple solution to flashing a penetration through a metal roof with an extreme pitch.

• Marked with dimensions to allow for easy sizing and installation.

• 25 Year EPDM rubber and 35 Year Silicone Warranty

Extreme Angle Multi-Flash Master Flash® Features:

The Extreme Angle Master Flash® Pipe Boot Flashing is specifically designed for application to a metal roof with a 35° to 65° angle while still coping with commonly encountered pipe penetrations.

• US Patent # D979,102

• 1 size

• Fits: to 12” (0 to 304mm) Pipes

• Base: 11” (279mm

• Made of Black EPDM Rubber or High Temp Gray Silicone, the flashings are specially compounded for a maximum resistance to ultraviolet light and ozone corrosion.

• The built in 40º degree pitch Allows to handle any extreme roof pitch (35º – 65º), sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction.

• For standard or retrofit applications with a 3/12º to 16/12º pitch, while accepting & responding to the most encountered pipe penetrations. These flashings were designed to seal existing pipes/vents that require a wrap-around existing or hard to reach installation.

• A simple solution to flashing a penetration through a metal roof with an extreme pitch.

• Marked with dimensions to allow for easy sizing and installation.

• The No hassle stainless steel gripper included.

• 25 Year EPDM rubber and 35 Year Silicone Warranty

• 25 Year EPDM rubber and 35 Year Silicone Warranty

ADVANCED OZONE RESISTANCE tested to…
EPDM 70 hour @ 500 pphm • SILICONE 70 hour @ 500 pphm

HIGH TEMPERATURE RESISTANCE

Tested to
Intermittent EPDM +135°C (+275°F) • Silicone +260°C (+500°F)
Continuous EPDM +100°C (+212°F) • Silicone +225°C (+437°F)

LOW TEMPERATURE RESISTANCE tested to…

EPDM – 55°C (-67°F) • Silicone – 74°C (-101°F)

COMPRESSION SET Maximum… EPDM 25% • Silicone 50%