Fix-A-Flash Master Flash®

For the metal roofing industry

Fix-A-Flash Master Flash® was specially designed for an oversize hole cut on the roof area but with a small pipe.

Made with black or gray EPDM rubber or available in high temp gray silicone.

Pipe Range: 1/8” (3mm) up to 15” (381mm) pipes.

Base:19-1/2” (495mm)

Call For Quote

  • Closed or Open TopAvailable 
  • Open Top Fits:6-3/4” to15-1/2” (171 to 393mm) Pipes 
  • Closed Top Fits:Closedto 15-1/2” (0 to 393mm) Pipes 
  • Base: 19-1/2” (495mm)
  • Made of black or Gray EPDM Rubber or High Temp Red Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. 
  • The flexible aluminum base is designed for an oversized hole cut for your pipe flashing to conform to any panel configuration. 

ADVANCED OZONE RESISTANCE tested to…

EPDM 70 hour @ 500 pphm • SILICONE 70 hour @ 500 pphm

HIGH TEMPERATURE RESISTANCE

Tested to

Intermittent EPDM +135°C (+275°F) • Silicone +260°C (+500°F)

Continuous EPDM +100°C (+212°F) • Silicone +225°C (+437°F)

LOW TEMPERATURE RESISTANCE tested to…

EPDM – 55°C (-67°F) • Silicone – 74°C (-101°F)

COMPRESSION SET Maximum… EPDM 25% • Silicone 50%